Paragliding helmet for PPG with wire communication set

New product

NGC-100S is intended for airborne sports pilots who need a radio communication in high noise environment level but also need to use a helmet. Meets an European requirements for airborne sports helmets - EN 966:2000.

NGG-100B was formed by merger of two other top products from NAVCOMM company: limited edition of carbon paragliding helmet for PPG NG-100 and helmets headsets deluxe with ANR and Bluetooth NC-100H.

More details

4496 Items

in stock

1 328,00 zł
tax incl.

Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.

  • NOTES

Product Options
SHELL TYPE
Fiberglass or carbon fiber?
Color may differ slightly from photos due to different monitor settings
GLASS FIBER, GLOSSY SILVER
 
GLASS FIBER, GLOSSY SILVER
 
GLASS FIBER, GLOSSY BLACK
 
GLASS FIBER, GLOSSY BLACK
 
GLASS FIBER, GLOSSY WHITE
 
GLASS FIBER, GLOSSY WHITE
 
GLASS FIBER, MAT RED
 
GLASS FIBER, MAT RED
 
GLASS FIBER, MAT BLUE
 
GLASS FIBER, MAT BLUE
 
GLASS FIBER, MAT SILVER
 
GLASS FIBER, MAT SILVER
 
VISOR
Including mounting screws set
TRANSPARENT
 
TRANSPARENT
 
DIMNESS
 
DIMNESS
 
WITHOUT VISOR
 
WITHOUT VISOR
[ - 56,91 zł]
HEADSETS MOUNTING
RIGID (NC-300H)
 
RIGID (NC-300H)
 
TWO POSITIONS (NC-100H, NC-150H)
 
TWO POSITIONS (NC-100H, NC-150H)
 
EAR CUPS COLOR
Color may differ slightly from photos due to different monitor settings
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CABLE - SHELL CONNECTION
For certain configurations, e.g. with an additional phone or MP3 connector monted on cable, the multi-plug must have more than 6-pins, therefore, in such a configuration, the cable disconnected from the shell can only be made on the LEMO 10-pin connector
PERMANENTLY
 
PERMANENTLY
 
mXLR 6-PIN
 
mXLR 6-PIN
[ + 72,36 zł]
LEMO 10-PIN
 
LEMO 10-PIN
[ + 406,50 zł]
ELECTRET 2.2 kOhm (typical for aviation headsets)
 
ELECTRET 2.2 kOhm (typical for aviation headsets)
 
DYNAMIC 600 Ohm
 
DYNAMIC 600 Ohm
[ + 40,65 zł]
DYNAMIC 150 Ohm (Yaesu)
 
DYNAMIC 150 Ohm (Yaesu)
[ + 40,65 zł]
DYNAMIC DIFFERENTIAL 200 Ohm
 
DYNAMIC DIFFERENTIAL 200 Ohm
[ + 81,30 zł]
HEADSETS SPEAKER TYPE
1-COIL
 
1-COIL
 
2-COILS
 
2-COILS
[ + 80,49 zł]
PLUG TYPE
How to choose a right plug type
A detailed description of all offered by us connectors contains a file Connectors.pdf.pdf
GA standard plugs (PJ, ZS, S1, Y2, U174/U) are offered with a aviation preamp.
K (Kenwood)
 
 
M (Motorola)
 
 
S2 (Icom, not air band)
 
 
S (Icom)
 
 
Y1 (Yaesu)
 
 
PJ (GA standard, preamp included)
 
[ + 80,49 zł]
U174/U (NATO)
 
[ + 186,18 zł]
S1 (Icom A-6, A-24)
 
[ + 80,49 zł]
Y2 (Yaesu air band)
 
[ + 80,49 zł]
Y3 (Icome A5/A23)
 
 
OMTP (mobile dev.)
 
 
Y5 (FOR INTERCOM)
 
 
Y5 (YAESU VX SERIES)
 
[ + 97,56 zł]
S4 (ICOM F SERIES)
 
[ + 97,56 zł]
ADDITIONAL CONNECTOR
Additional cable plug for the second radio station (eg aviation). Two-coil speakers required.
GA standard plugs (PJ, ZS, S1, Y2, Y4, U174/U) are offered with a aviation preamp.
WITHOUT AN ADDITIONAL CONNECTOR
 
 
S1 (Icom A-6, A-24, NC-55A)
 
[ + 203,25 zł]
Y2 (Yaesu lotnicze)
 
[ + 203,25 zł]
Y4 (YAESU FTA-550)
 
[ + 243,90 zł]
PJ (GA standard, preamp included)
 
[ + 243,90 zł]
EAR SEALS TYPE
GEL
 
GEL
 
FOAM
 
FOAM
[ - 40,65 zł]
OPTIONS
AVIATION PREAMP
 
AVIATION PREAMP
[ + 80,49 zł]
COVER FOR DYNAMIC MICROPHONE
 
COVER FOR DYNAMIC MICROPHONE
[ + 15,45 zł]
EXTERNAL PTT SOCKET
 
EXTERNAL PTT SOCKET
[ + 32,52 zł]
VARIO, MP3 SOCKET (2-coils speakers required)
 
VARIO, MP3 SOCKET (2-coils speakers required)
[ + 40,65 zł]
PHONE SOCKET AHJ/CTIA  (2-coils speakers required)
 
PHONE SOCKET AHJ/CTIA (2-coils speakers required)
[ + 81,30 zł]
PHONE SOCKET, OMTP (2-coils speakers required)
 
PHONE SOCKET, OMTP (2-coils speakers required)
[ + 81,30 zł]
SOCKET FOR BLUETOOTH INTERCOM
 
SOCKET FOR BLUETOOTH INTERCOM
[ + 243,90 zł]
EXTERNAL PTT CONNECTOR
 
EXTERNAL PTT CONNECTOR
[ + 40,65 zł]
PHONE CONNECTOR, AHJ/CTIA (2-coils speakers required)
 
PHONE CONNECTOR, AHJ/CTIA (2-coils speakers required)
[ + 121,95 zł]
PHONE CONNECTOR, OMTP (2-coils speakers required)
 
PHONE CONNECTOR, OMTP (2-coils speakers required)
[ + 121,95 zł]
VARIO, MP3 CONNECTOR (2-coils speakers required)
 
VARIO, MP3 CONNECTOR (2-coils speakers required)
[ + 48,78 zł]
CONNECTOR FOR BLUETOOTH INTERCOM
 
CONNECTOR FOR BLUETOOTH INTERCOM
[ + 243,90 zł]
TRANSPORT BAG FOR A PPG HELMET
 
TRANSPORT BAG FOR A PPG HELMET
[ + 96,75 zł]
4-FIELD, 3.5MM, JACK-JACK-CABLE
 
4-FIELD, 3.5MM, JACK-JACK-CABLE
[ + 11,38 zł]
AUDIO ADAPTER,  JACK 3,5mm - USB-C
 
AUDIO ADAPTER, JACK 3,5mm - USB-C
[ + 23,58 zł]
NOTES TO SETUP
If you have any comments to the order configuration, leave them here.
 

Data sheet

Noise reduction method Passive
Passive noise suppression -24dB
Speakers frequency response 20-17000 Hz
Speakers impedance 300 Ohm / 32 Ohm
Speakers effectiveness 95 +/-5 dB SPL
Microphone type elektretowy / dynamiczny
Microphone frequency response 100-8000 Hz
Microphone impedance 2,2 kOhm / 600 Ohm
Microphone sensitivity -33 dB +/-4 (wersja podstawowa)
Additional features PTT
Cable length 1,5m
Volume control Yes, independent L/R
Mono / stereo switch Yes
Detachable cable (multi pin connector) OPTION
GA microphone preamp OPTION
Material overlay YES
Ear seals type Gel

More info

NG-100 is a helmet designed for airborne sports. Its shell is made of fiberglass and has a multilayer structure - 3 layers on the whole crust plus an additional 4 layer in the places vulnerable to mechanical injury. The thickness of these layers contains between 1.5 and 2 mm. The interior of the helmet is lined with polystyrene type EPS with a thickness of 20 to 25mm (dependent on the size of the helmet). The last layer is a soft finish made of foam covered using a high quality, pleasant to the touch and resistant to abrasion material.

NG-100 the same way as other airborne sports helmets of our production has a special system that secures the helmet to the head. It consists of two flexible tubes reinforced inside with nylon cord and mounted on the sides and a nylon belt with a snap buckle allowing wide range of regulation.. The use of tubular handles can comfortably adjust the position of the belt relative to the chin. The buckle construction allows to clasp using one hand. Strap and buckle were sheltered an extra layer of soft material to prevent causing discomfort in the chin.

NG-100 NG is also equipped with hinges with the adjustable force of resistance to enable attachment of visor. The purpose of the visor is to protect the face and eyes from the strong gusts of wind, dust, dirt and small objects podrywanymi from the ground, eg. by a string of propeller. Visor is made of polycarbonate (material used for the production of windows on commercial aircraft), with a cured surface at one side with and a thickness of 1.8mm. This optional element is offered in two versions - transparent and sun protection with a mirror coating.

NG-100 has a cuts on the ears and mounting holders for headset.

External construction of NC-100H it's a generally accepted standard at the airborne sports market. The headset contains: ear cups (available in three colors: blue, black and white), equipped with gel seals, mounted on the "gooseneck" microphone and the arm connection kit allowing to set the microphone in the desired position.

Moreover, the handset is equipped with five feet, reinforced with additional braided cable terminated with a one from a long list of popular plugs. The passive electronics consists of dynamic microphone with noise compensation and two pairs of inserts speaker with an impedance of 300 and 32 Ohm. There is also a PTT (push-to-talk) button mounted on the shell without microphone boom.

MAJOR FEATURES:

  • shell made of glass fiber
  • three and even in some places four layers shell structure
  • thick layer of expanded polystyrene (EPS) at the inner side shell
  • interior finished with soft foam and good quality materials
  • convenient and easy matching strap
  • optional visor mounting hinges with the adjustable force of resistance
  • buckle strap can be clasp using one hand
  • 6 sizes enable accurate fit of the helmet to the head
  • microphone rotates angle: 320°
  • Supplied with gel pads and cotton overlays
  • construction: aesthetic with high-quality materials
  • Warranty: 3 years

Reviews

Write a review

Paragliding helmet for PPG with wire communication set

Paragliding helmet for PPG with wire communication set

NGC-100S is intended for airborne sports pilots who need a radio communication in high noise environment level but also need to use a helmet. Meets an European requirements for airborne sports helmets - EN 966:2000.

NGG-100B was formed by merger of two other top products from NAVCOMM company: limited edition of carbon paragliding helmet for PPG NG-100 and helmets headsets deluxe with ANR and Bluetooth NC-100H.

Accessories

18 other products in the same category:

Download

Declaration of conformity PL

Declaration of conformity for NG100 helmets in Polsih

Download (1.56M)

Declaration of conformity EN

Declaration of conformity for NG100 helmets in English

Download (18.74M)