NGC-100W is intended for airborne sports pilots who need a radio communication in high noise environment level but also need to use a helmet. Meets an European requirements for airborne sports helmets - EN 966:2000.
23923 Item Items
Warning: Last items in stock!
|Noise reduction method||Passive|
|Passive noise suppression||-24dB|
|Speakers frequency response||20-17000 Hz|
|Speakers impedance||300 Ohm / 32 Ohm|
|Speakers effectiveness||95 +/-5 dB SPL|
|Microphone type||elektretowy / dynamiczny|
|Microphone frequency response||100-8000 Hz|
|Microphone impedance||2,2 kOhm / 600 Ohm|
|Microphone sensitivity||-33 dB +/-4 (wersja podstawowa)|
|Volume control||Yes, independent L/R|
|Mono / stereo switch||Yes|
|Detachable cable (multi pin connector)||OPTION|
|GA microphone preamp||OPTION|
|Ear seals type||Gel|
NG-100 is a helmet designed for airborne sports. Its shell is made of fiberglass and has a multilayer structure - 3 layers on the whole crust plus an additional 4 layer in the places vulnerable to mechanical injury. The thickness of these layers contains between 1.5 and 2 mm. The interior of the helmet is lined with polystyrene type EPS with a thickness of 20 to 25mm (dependent on the size of the helmet). The last layer is a soft finish made of foam covered using a high quality, pleasant to the touch and resistant to abrasion material.
NG-100 the same way as other airborne sports helmets of our production has a special system that secures the helmet to the head. It consists of two flexible tubes reinforced inside with nylon cord and mounted on the sides and a nylon belt with a snap buckle allowing wide range of regulation.. The use of tubular handles can comfortably adjust the position of the belt relative to the chin. The buckle construction allows to clasp using one hand. Strap and buckle were sheltered an extra layer of soft material to prevent causing discomfort in the chin.
NG-100 NG is also equipped with hinges with the adjustable force of resistance to enable attachment of visor. The purpose of the visor is to protect the face and eyes from the strong gusts of wind, dust, dirt and small objects podrywanymi from the ground, eg. by a string of propeller. Visor is made of polycarbonate (material used for the production of windows on commercial aircraft), with a cured surface at one side with and a thickness of 1.8mm. This optional element is offered in two versions - transparent and sun protection with a mirror coating.
NG-100 has a cuts on the ears and mounting holders for headset.
External construction of NC-100H it's a generally accepted standard at the airborne sports market. The headset contains: ear cups (available in three colors: blue, black and white), equipped with gel seals, mounted on the "gooseneck" microphone and the arm connection kit allowing to set the microphone in the desired position.
Moreover, the handset is equipped with five feet, reinforced with additional braided cable terminated with a one from a long list of popular plugs. The passive electronics consists of dynamic microphone with noise compensation and two pairs of inserts speaker with an impedance of 300 and 32 Ohm. There is also a PTT (push-to-talk) button mounted on the shell without microphone boom.
2 349,00 zł 2 378,00 zł
2 149,00 zł 2 178,00 zł
1 378,00 zł
1 028,00 zł
2 399,00 zł
1 028,00 zł
3 199,00 zł
1 028,00 zł
1 028,00 zł