No products
Categories
FAQ
- How the Balanced armature driver works
- How to choose a right helmet size
- Fiberglass or carbon fiber?
- How to choose a right microphone
- What are the dual-coil speakers
- How the active noise reduction works
- How to choose a right plug type
- How to NC-BT/ANR module works
- Headsets compatibility
- Jakie słuchawki lotnicze wybrać
Top sellers
-
NC-900, dual-band, handheld transceiver, 10W
NC-900 is the next generation of NAVCOMM dual band, handheld...
449,00 zł -
Flight Square Protractor
Protractor is the primary instrument navigation in aviation. It is also...
25,00 zł -
Deluxe aviation headset
NC-300D it's a deluxe headset model - designed for demanding users who...
899,00 zł -
Material overlay on the handset
When the summer comes and the temperature inside the aircraft cabin...
19,00 zł -
Pilot kneeboard - compact
NK-4 is a compact kneeboard whose main advantage is flexible and modify...
289,00 zł -
-
Audio tube, listen only
ZF-1 is a simple set for listening only. It consists of a headset with a...
49,00 zł -
Battery for TK-7xx series, 1100mAh
TK-BP1 is a maintenance-free battery to power the TK-7xx (TK-750,...
99,00 zł
Top sellers
-
From 999,00 zł in stockCarbon paragliding helmet for PPG witout...
NG-100C (Carbon) is a limited edition of NAVCOMM airborne sports helmets. Designed specifically for members of the Polish National PPG Team . Model NG-100C belongs to the class of high-performance - guaranteeing the highest level of protection (meets an European requirements for airborne sports helmets - EN 966:2000) and comfort. Used in the production of...
From 999,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
169,00 zł in stockAviadion headsets adapter XLR to PJ
XLR/PJ is an adapter enabling the connection of aviation headsets equipped with an XLR-5 connector which is a standard e.g. in Airbus aircraft for installations terminated with PJ connectors (PJ068 and PJ055) which are the GA standard.
169,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
Adapter for recording audio from the...
PJ-REC1 is an adapter enabling recording of radio and on-board communication from the cockpits of ultralight, commercial and general aviation (GA) aircrafts. It has built-in electronics that adjust the audio signal level to the standard required by recording devices. It works by capturing the audio signal from the on-board intercom. It is easy to use...
From 189,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
49,00 zł in stockClonning cable
TK-C / K is a cable that allows the transfer (cloning) set between two transceivers. It is equipped with two "K" (Kenwood) standard plugs. Works with models of TK-750, TK-750MKII, TK-760, TK-890 and NC-900. The cloning operates only between two, the same models. For details on the function itself cloning are the operating instructions for the above models.
49,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
89,00 zł in stockSoft top for NC-300 and NC-1000 headsets
The TS-300 is a comfortable finish of the headband in the NC-300 and NC-1000 aviation headphones. It is made of a sponge trimmed with leather imitation. Mounting on the headband is done with Velcro tapes sewn into internal layers.
89,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
39,00 zł in stockA set of screws fixing headphones NC300...
HEP-2is a set of two mounting screws with appropriate washers for rigid connection of headphones NC-300 series with a PPG helmet. It is one of two available in our offer mounting standards for helmet's headsets. Screw and outer washer made of stainless steel. The set includes two screws, two nuts with a silicone gasket and two large (external) and two...
39,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
169,00 zł in stockAviadion headsets adapter PJ to U174/U
PJ-U174/U is an adapter for connecting the typical aviation headsets, equipped with a PJ055 (microphone) and PJ068 (speakers) connectors which is a standard, eg. in the Cessna planes to installations equipped with single U174/U connector which is a helicopter's standard.
169,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
149,00 zł in stockU-174/U plug for on-cable mounting
U-174/U is one of the connector standards used in civil and military aviation. It is used to connect aviation headsets to the on-board installation, most often in helicopters. The offered plug is dismountable and is used for mounting on a multi-core cable.
149,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
Ultra Lightweight aviation headsets...
Ultra Lightweight headset NC-400Uv2 MTM (made-to-measure) is a new generation product, being not only a response to current trends in air transport, but also designing the development trends of this industry. NAVCOMM is currently the only manufacturer offering such a solution in the aviation industry. Differences from the previous version: Changed...
From 1 799,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.In Stock -
189,00 zł in stockTransport bag for aviation accessories
The BG-H bag is designed for the safe transport of aviation accessories such as headphones, kneeboard, maps, navigation devices, logbooks, etc.. It was made of strong nylon fabric (Cordura) with type 800. It has oval, padded foam and fastened with two-way zipper lid and a wide shoulder strap with adjustable length. For convenience, the bar was stocked...
189,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
59,00 zł in stockHelical antenna for TK-760
1 Review(s)TK-A70 is a flexible helical antenna operating in the UHF band (400-470MHz) equipped with SMA-M connector. It is a standard equipment for TK-760 radios.
59,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
Paragliding helmet for PPG with wire...
NGC-100C-A is a master-class equipment. It was created based on the best components and provides the best performance in terms of attenuation, signal processing, safety (meets an European requirements for airborne sports helmets - EN 966:2000) and comfort. NG-100C-A is a set designed for the most demanding PPG. This model has been chosen by the lot of...
From 2 649,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
From 219,00 zł in stockThroat microphone with dual sensor (dual PTT)
Throat microphone is a specific type of microphone distinguished by the fact that the diaphragm is not stimulated by the air-borne sound wave, only the vibration of the skin on the neck near the larynx. Linked to this is an important feature - high resistance to interference from background noise, which makes throat microphone provides a very good...
From 219,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
49,00 zł out of stockS2/S3 to Y4 (waterproof) adapter
YS-2 adapter allows hook up an external headset terminated with type S2 / S3 (brand standard Icom for radio 2m / 7cm and duobanderów) to the radio with a slot for plug type Y4 (brand standard Yaesu for radio VX-6 / VX-7) .
49,00 złShipping: 2 to 8 weeksout of stock -
259,00 zł in stockPJ headsets extension cord
PJ / PJ is a 165 cm long extension cord for GA headphones, terminated with PJ plugs (PJ055, PJ068).
259,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
From 799,00 zł in stocknRaptor Pro - professional e-sport and...
The name of this model is not accidental, raptors are commonly called dromeosaurs - small, agile predators that developed during the Jurassic period. Raptors attacked their victims in organized watts, which allowed them to hunt for much larger victims. The Raptor is also the name of Lockheed's fighter made in stealth technology, which corelate with the...
From 799,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
169,00 zł in stockAviadion headsets adapter ZS-F/PJ
PJ-ZS is an adapter that allows to connect headsets equipped with ZS-M connectors (plug) which was widely used among aircraft manufacturers from former Eastern Bloc countries (eg Wilga, Zlin) to on-board installations with PJ standard (PJ055 and PJ068) standard, eg in Cessna aircraft.
169,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
From 729,00 zł in stockParagliding helmet for PPG witout...
NG-100R (RED MAT) is a helmet designed for airborne sports (meets an European requirements for airborne sports helmets - EN 966:2000). Its shell is made of fiberglass and has a multilayer structure - 3 layers on the whole crust plus an additional 4 layer in the places vulnerable to mechanical injury. The thickness of these layers contains between 1.5 and...
From 729,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
29,00 zł in stockS2/S3 to Y1 plugs adaptor
YS-2 adapter allows to connect an external headset equipped with S2/S3 plug (brand standard Icom for radio 2m / 7cm and duobanderów) to the radio with a slot for plug type Y1 (brand standard Yaesu for UHF/VHF FM radios) . YS-2 in most cases not suitable for headsets and radios for airband communication (118-136MHz, AM modulation). Although the same size...
29,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
99,00 zł in stockCarrying bag for compact aviation headsets
The HB-C bag is dedicated to aviation headphones NC-100 brand NAVCOMM, and portable aviation intercom series IC (IC-2, IC-4). It also should fit to all fold-up type headsets (with folding headband) and other aviation equipment, the dimensions of the deposit does not exceed 160x170x85mm.
99,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
From 729,00 zł in stockParagliding helmet for PPG witout...
NG-100S (SILVER) is a helmet designed for airborne sports (meets an European requirements for airborne sports helmets - EN 966:2000). Its shell is made of fiberglass and has a multilayer structure - 3 layers on the whole crust plus an additional 4 layer in the places vulnerable to mechanical injury. The thickness of these layers contains between 1.5 and 2...
From 729,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
From 2 099,00 zł in stockHelmets headsets deluxe with ANR and...
This product is intended for airborne sports where there is a need of radio communication in high noise environment but also is required to use a helmet. NC-2300H is our flagship helmet handsets. It combines more than twenty years of experience the company gained on airborne sports market with the latest technology in the field of active damping and...
From 2 099,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
From 171,00 zł in stockAviadion headsets adapter PJ/S
PJS-1PTT is an adapter that allows to connect aviation headphones equipped with plugs PJ (PJ055 and PJ068) to the portable aviation radios equipped with a small jacks with a diameter of 2.5 and 3.5mm. This adaptor also has an additional 3.5mm socket for an external PTT button
From 171,00 złShipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.in stock -
169,00 zł out of stockThroat microphone with dual sensor and...
Throat microphone is a specific type of microphone distinguished by the fact that the diaphragm is not stimulated by the air-borne sound wave, only the vibration of the skin on the neck near the larynx. Linked to this is an important feature - high resistance to interference from background noise, which makes throat microphone provides a very good...
169,00 złShipping: 2 to 8 weeksout of stock
