Ultra Lightweight headset NC-400U MTM...
FAQ
NC-900 is the next generation of NAVCOMM dual band, handheld...
Protractor is the primary instrument navigation in aviation. It is also...
NC-300D it's a deluxe headset model - designed for demanding users who...
When the summer comes and the temperature inside the aircraft cabin...
NK-4 is a compact kneeboard whose main advantage is flexible and modify...
ZF-1 is a simple set for listening only. It consists of a headset with a...
TK-BP1 is a maintenance-free battery to power the TK-7xx (TK-750,...
Tags
NC-AA3 desktop charger is intended to charge the batteries of the NC-33M marine radio. The charger requires a power supply TK-H, which is available as a separate item or power cable for connection to 12V car installation (TK-C12V). It allows you to recharge the batteries combined with the radio or the battery disconnected from the radio.
PJS-1PTT is an adapter that allows to connect aviation headphones equipped with plugs PJ (PJ055 and PJ068) to the portable aviation radios equipped with a small jacks with a diameter of 2.5 and 3.5mm. This adaptor also has an additional 3.5mm socket for an external PTT button
NG-100N (NAVY MAT) is a helmet designed for airborne sports (meets an European requirements for airborne sports helmets - EN 966:2000). Its shell is made of fiberglass and has a multilayer structure - 3 layers on the whole crust plus an additional 4 layer in the places vulnerable to mechanical injury. The thickness of these layers contains between 1.5 and...
NC-10R is a lightweight headset dedicated wherever there is a need a voice communication in terms of increased noise, and where for various reasons can not be used classic headphone with hard vertical headband. In this model, the vertical bow was replaced by a system of two components - the plastic, adjustable length allows to set the position of the...
NGC-100N is intended for airborne sports pilots who need a radio communication in high noise environment level but also need to use a helmet. Meets an European requirements for airborne sports helmets - EN 966:2000. NGG-100N was formed by merger of two other top products from NAVCOMM company: limited edition of carbon paragliding helmet for PPG NG-100...
NC-Y4Y a waterproof connector adapter containing Y4 plug on the one hand and Y1 socket of the other end. Adaptor is dedicated to marine radio NC-33M, allowing to change the unpopular waterproof standard socket Y4 to widely used type Y1 .
This product is intended for airborne sports where there is a need of radio communication in high noise environment but also is required to use a helmet. NC-100H headsets is dedicated to NG-100 helmets series. They have been developed based on our aviation headsets model NC-300. They have a specially shaped wire arms matched to holders mounted in our...
AGP300 is an adapter that allows to connect an accessories equipped with a 2-pin connector used by Motorola (eg. In the model GP300) to the following models from this company: HT750, HT1250, HT1250LS, HT1550XLS, MTX850, MTX850LS, MTS8250, MTX8250LS, MTX950, MTX9250, GP140, GP320, GP328, GP338, GP340, GP360, GP380, GP640, GP680, GP1280, PRO5150, PRO7150,...
The NGC-1000ABT-HCE it's a powered paragliders helmet (for PPG), entirely made of carbon fiber with a wired radio installation, Bluetooth wireless module and ANR (Active Noise Reduction). It is a master class equipment, designed for competitive pilots, where each gram of weight is important for safety (meets an European requirements for airborne sports...
CM-LGF-1 is an optional cable designed for LGF-21 and LGF-24 laryngophones equipped with mini-XLR multi-pin connection sockets. The CM-LGF-1 cable connects the PTT button to the radio. It is made of thick multi-core cable reinforced with an additional Kevlar braid. The spiral design ensures stretch in the range of 40-120cm. Is terminated with a connector...
The IC-2PPG is a small, portable intercom designed for communication between two crew members and for signal retransmission from an on-board or portable radio. It has two permanently attached cables terminated with mXLR 6-pin plugs in the NAVCOMM standard, enabling the connection of two pairs of headsets, one mXLR 6-pin connector for a radio cable, 3.5mm...
PJ-REC1 is an adapter enabling recording of radio and on-board communication from the cockpits of ultralight, commercial and general aviation (GA) aircrafts. It has built-in electronics that adjust the audio signal level to the standard required by recording devices. It works by capturing the audio signal from the on-board intercom. It is easy to use...
Antenna adapter AA-1 allows you to connect an external antenna equipped with UC1 connector into radios having the SMA socket
NC-50B it's an aviation headsets made in children's size. This model is dedicated to people with head circumference below 50cm. It is equipped with a headband of smaller diameter and a correspondingly smaller ear cups. An important feature of this model is also lower weight. This is important especially for the youngest users. It is also important that,...
The NGC-100HCE set is the world's first communication helmet for PPG pilots, entirely made of carbon fiber. It is a master class equipment, designed for pilots flying the competition, where every gram of weight is important for safety and comfort of use. With just a 820g of weight this model is probably the lightest, fully certified for airborne sports...
Ultra Lightweight headset NC-400U MTM (made-to-measure) is a new generation product, being not only a response to current trends in air transport, but also designing the development trends of this industry. NC-400U is a unique design that uses two innovative technologies - balanced armature instead of traditional membrane speakers and made-to-measure...
This product is intended for airborne sports where there is a need of radio communication in high noise environment but also is required to use a helmet. NC-100H headsets is dedicated to NG-100 helmets series. They have been developed based on our aviation headsets model NC-300. They have a specially shaped wire arms matched to holders mounted in our...
Go is a series of wireless intercoms based on Bluetooth technology developed specifically for communication in aviation sports. The Talk4 model is a 2-place intercom, providing simultaneous, two-way communication between two users at a distance of up to 800m and the ability to create a communication group of up to 4 devices for quick switching between...
NC-BTE is a simple, easy-to-mount external Bluetooth adapter. Fits aviation headphones NC100, NC150, NC300 and NC400 series which are equipped with two-speaker loudspeakers and a 3.5mm jack socket for MP3 player or telephone. NC-BTE allows pairing headphones with other Bluetooth devices such as a phone, smartphone, tablet, MP3 player. Important technical...
CM-1/PJ is a multi-core shielded cable terminated with PJ standard plugs (PJ068, PJ055) intended for NC series aviation headphones. The CM-1/PJ cable is offered in two versions - straight and spiral. It has a steel braid and additional internal reinforcement.
This product is intended for airborne sports where there is a need of radio communication in high noise environment but also is required to use a helmet. Model NC-1300H the next stage of technological development of NAVCOMM. After a series of passive headphones came time to design the next one with active electronics. Built-in ANR (Active Noise Reduction)...
The NC-300-L is a headphone designed for airport ground handling. Based on the NC-300 model, the design provides high levels of external noise suppression and clear, noise-free voice communications - critical parameters for the safety of airport personnel and servicing of machinery. The NC-300-L has a long list of optional components that allow you to...
NC-BP7 is a maintenance-free battery to power the radio NC-55A. It consists of four flat Li-Ion cells with a total capacity of 2400mAh and the voltage of 7.4V, as well as the control electronics ensures the proper operation of the cell enclosed in a hermetically sealed profile matched to the body of the radio station.
The NC-100-L is a headphone designed for airport ground handling. This is the equivalent of the MT (for ex. MT7H79A) series from Peltor. Based on the NC-100 model, the design provides high levels of external noise suppression and clear, noise-free voice communications - critical parameters for the safety of airport personnel and servicing of machinery....