Carbon paragliding helmet for PPG with wire communication set

New product

NGC-100C is a master-class equipment. It was created based on the best components and provides the best performance in terms of passive attenuation, signal processing, safety (meets an European requirements for airborne sports helmets - EN 966:2000) and comfort. NGC-100C is a set designed for the most demanding PPG pilots.

NGC-100C was formed by merger of two other top products from NAVCOMM company: limited edition of carbon paragliding helmet for PPG NG-100C and helmets headsets deluxe with ANR and Bluetooth NC-300H.

More details

32898 Items

in stock

1 128,00 zł

Shipment: finished products 2-3 business days, non-prefabricated products - up to 10 business days.

  • NOTES

Product Options
SHELL TYPE
Fiberglass or carbon fiber?
Color may differ slightly from photos due to different monitor settings
CARBON FIBER, CLEAR VARNISH
 
CARBON FIBER, CLEAR VARNISH
 
VISOR
Including mounting screws set
TRANSPARENT
 
TRANSPARENT
 
DIMNESS
 
DIMNESS
 
WITHOUT VISOR
 
WITHOUT VISOR
[ - 56,91 zł]
HEADSETS MOUNTING
RIGID (NC-300H)
 
RIGID (NC-300H)
 
TWO POSITIONS (NC-100H, NC-150H)
 
TWO POSITIONS (NC-100H, NC-150H)
 
EAR CUPS COLOR
Color may differ slightly from photos due to different monitor settings
 
 
 
 
 
 
 
 
 
 
 
 
CABLE - SHELL CONNECTION
For certain configurations, e.g. with an additional phone or MP3 connector monted on cable, the multi-plug must have more than 6-pins, therefore, in such a configuration, the cable disconnected from the shell can only be made on the LEMO 10-pin connector
PERMANENTLY
 
PERMANENTLY
 
mXLR 6-PIN
 
mXLR 6-PIN
[ + 44,72 zł]
LEMO 6-PIN
 
LEMO 6-PIN
[ + 325,20 zł]
ELECTRET 2.2 kOhm (typical for aviation headsets)
 
ELECTRET 2.2 kOhm (typical for aviation headsets)
 
DYNAMIC 600 Ohm
 
DYNAMIC 600 Ohm
[ + 40,65 zł]
DYNAMIC 150 Ohm (Yaesu)
 
DYNAMIC 150 Ohm (Yaesu)
[ + 40,65 zł]
DYNAMIC DIFFERENTIAL 200 Ohm
 
DYNAMIC DIFFERENTIAL 200 Ohm
[ + 81,30 zł]
MICROPHONE BOOM
HYBRID
 
HYBRID
 
"GOOSE NECK"
 
"GOOSE NECK"
 
HEADSETS SPEAKER TYPE
1-COIL
 
1-COIL
 
2-COILS
 
2-COILS
[ + 80,49 zł]
PLUG TYPE
How to choose a right plug type
A detailed description of all offered by us connectors contains a file Connectors.pdf.pdf
GA standard plugs (PJ, ZS, S1, Y2, U174/U) are offered with a aviation preamp.
K (Kenwood)
 
 
M (Motorola)
 
 
S2 (Icom, not air band)
 
 
S (Icom)
 
 
Y1 (Yaesu)
 
 
PJ (GA standard, preamp included)
 
[ + 80,49 zł]
Y4 (NC-33M)
 
[ + 40,65 zł]
S1 (Icom A-6, A-24)
 
[ + 80,49 zł]
Y2 (Yaesu air band)
 
[ + 80,49 zł]
Y3 (Icome A5/A23)
 
 
OMTP (mobile dev.)
 
 
Y5 (FOR INTERCOM)
 
 
ADDITIONAL CONNECTOR
Additional cable plug for the second radio station (eg aviation). Two-coil speakers required.
GA standard plugs (PJ, ZS, S1, Y2, Y4, U174/U) are offered with a aviation preamp.
WITHOUT AN ADDITIONAL CONNECTOR
 
 
S1 (Icom A-6, A-24, NC-55A)
 
[ + 203,25 zł]
Y2 (Yaesu lotnicze)
 
[ + 203,25 zł]
Y4 (YAESU FTA-550)
 
[ + 243,90 zł]
EAR SEALS TYPE
GEL
 
GEL
 
FOAM
 
FOAM
[ - 81,30 zł]
OPTIONS
AVIATION PREAMP
 
AVIATION PREAMP
[ + 80,49 zł]
COVER FOR DYNAMIC MICROPHONE
 
COVER FOR DYNAMIC MICROPHONE
[ + 15,45 zł]
EXTERNAL PTT SOCKET
 
EXTERNAL PTT SOCKET
[ + 32,52 zł]
VARIO, MP3 SOCKET (2-coils speakers required)
 
VARIO, MP3 SOCKET (2-coils speakers required)
[ + 40,65 zł]
PHONE SOCKET AHJ/CTIA  (2-coils speakers required)
 
PHONE SOCKET AHJ/CTIA (2-coils speakers required)
[ + 81,30 zł]
PHONE SOCKET, OMTP (2-coils speakers required)
 
PHONE SOCKET, OMTP (2-coils speakers required)
[ + 81,30 zł]
EXTERNAL PTT CONNECTOR
 
EXTERNAL PTT CONNECTOR
[ + 40,65 zł]
PHONE CONNECTOR, AHJ/CTIA (2-coils speakers required)
 
PHONE CONNECTOR, AHJ/CTIA (2-coils speakers required)
[ + 89,43 zł]
PHONE CONNECTOR, OMTP (2-coils speakers required)
 
PHONE CONNECTOR, OMTP (2-coils speakers required)
[ + 89,43 zł]
VARIO, MP3 CONNECTOR (2-coils speakers required)
 
VARIO, MP3 CONNECTOR (2-coils speakers required)
[ + 48,78 zł]
TRANSPORT BAG FOR A PPG HELMET
 
TRANSPORT BAG FOR A PPG HELMET
[ + 96,75 zł]
4-FIELD, 3.5MM, JACK-JACK-CABLE
 
4-FIELD, 3.5MM, JACK-JACK-CABLE
[ + 11,38 zł]
NOTES TO SETUP
If you have any comments to the order configuration, leave them here.
 

Data sheet

Noise reduction method Passive
Passive noise suppression -24dB
Speakers frequency response 20-17000 Hz
Speakers impedance 300 Ohm / 32 Ohm
Speakers effectiveness 95 +/-5 dB SPL
Microphone type elektretowy / dynamiczny
Microphone frequency response 100-8000 Hz
Microphone impedance 2,2 kOhm / 600 Ohm
Microphone sensitivity -33 dB +/-4 (wersja podstawowa)
Additional features PTT
Cable length 1,5m
Volume control Yes, independent L/R
Mono / stereo switch Yes
Detachable cable (multi pin connector) OPTION
GA microphone preamp OPTION
Material overlay YES
Ear seals type Gel

More info

Airborne sports Helmet NG-100C (Carbon) is a limited edition of NAVCOMM airborne sports helmets. Designed specifically for members of the Polish National PPG Team . Model NG-100C belongs to the class of high-performance - guaranteeing the highest level of protection and comfort. Used in the production of this model carbon fibers provide increased strength of the shell and lower weight, a lighter helmet is less strain on the neck muscles, especially when performing acrobatics generating large side overload .

NG-100C the same way as other airborne sports helmets of our production has a special system that secures the helmet to the head. It consists of two flexible tubes reinforced inside with nylon cord and mounted on the sides and a nylon belt with a snap buckle allowing wide range of regulation.. The use of tubular handles can comfortably adjust the position of the belt relative to the chin. The buckle construction allows to clasp using one hand. Strap and buckle were sheltered an extra layer of soft material to prevent causing discomfort in the chin.

NG-100C NG is also equipped with hinges with the adjustable force of resistance to enable attachment of visor. The purpose of the visor is to protect the face and eyes from the strong gusts of wind, dust, dirt and small objects podrywanymi from the ground, eg. by a string of propeller. Visor is made of polycarbonate (material used for the production of windows on commercial aircraft), with a cured surface at one side with and a thickness of 1.8mm. This optional element is offered in two versions - transparent and sun protection with a mirror coating.

NG-100C has a cuts on the ears and mounting holders for headset (option), making it possible to attaching to the shell the communications headsets (eg. NC100H, NC150H or NC300H) or soundproofing ear cups. This model can be optionally equipped with one of two offered by NAVCOMM headset mounting holders. The first one based on the hinged wire holder ("click" type mounting ) or the second one using flat steel bands mount to the helmet by means of a single screw (rigid mounting).

External construction of NC-300H it's a generally accepted standard at the airborne sports market. The headset contains: ear cups (available in three colors: gray-green, black or orange), equipped with gel seals and additionally cotton covers, mounted on the hybrid arm (wire frame connected with a hinge so. "gooseneck") microphone and the arm connection kit allowing to set the microphone in the desired position.

Moreover, the handset is equipped with five feet, reinforced with additional braided cable terminated with a one from a long list of popular plugs. The passive electronics consists of dynamic microphone with noise compensation and two pairs of inserts speaker with an impedance of 300 and 32 Ohm. There is also a PTT (push-to-talk) button mounted on the shell without microphone boom.

MAJOR FEATURES:

  • shell made of carbon fiber
  • three and even in some places four layers shell structure
  • thick layer of expanded polystyrene (EPS) at the inner side shell
  • interior finished with soft foam and good quality materials
  • convenient and easy matching strap
  • optional visor mounting hinges with the adjustable force of resistance
  • buckle strap can be clasp using one hand
  • 6 sizes enable accurate fit of the helmet to the head
  • microphone rotates angle: 320°
  • Supplied with gel pads and cotton overlays
  • construction: aesthetic with high-quality materials
  • Warranty: 3 years

Reviews

Write a review

Carbon paragliding helmet for PPG with wire communication set

Carbon paragliding helmet for PPG with wire communication set

NGC-100C is a master-class equipment. It was created based on the best components and provides the best performance in terms of passive attenuation, signal processing, safety (meets an European requirements for airborne sports helmets - EN 966:2000) and comfort. NGC-100C is a set designed for the most demanding PPG pilots.

NGC-100C was formed by merger of two other top products from NAVCOMM company: limited edition of carbon paragliding helmet for PPG NG-100C and helmets headsets deluxe with ANR and Bluetooth NC-300H.

Accessories

15 other products in the same category:

Download

Declaration of conformity PL

Declaration of conformity for NG100 helmets in Polsih

Download (1.56M)

Declaration of conformity EN

Declaration of conformity for NG100 helmets in English

Download (18.74M)