Top sellers

Accessories

Standard and optional equipment for NAVCOMM transceivers

Accessories There are 70 products.

per page
Showing 25 - 48 of 70 items
  • 129,00 PLN in stock

    OHM-20 headset containing a single speaker placed on an adjustable headband, and a electret microphone with noise compensation mounted on the gooseneck type boom. It comes with an actively powered (1 x AAA battery) VOX function, which allow automatically activate broadcast by voice in an environment of relatively low-intensity noise (eg. Hot air balloon...

    129,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 119,00 PLN in stock

    NC-BP6 is a maintenance-free battery to power the radio NC-900. It consists of four flat Li-Ion cells with a total capacity of 2600mAh and the voltage of 7.4V, as well as the control electronics ensures the proper operation of the cell enclosed in a hermetically sealed profile matched to the body of the radio station.

    119,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 119,00 PLN in stock

    ZS-100P (Professional) is a set of two-way radio communications containing high grade condenser microphone integrated in one housing with PTT button and the so-called acoustic tube - transparent, flexible pipe terminated silicone pad placed to the ear, which transmits sound generated by a miniature speaker. More of than in the lower part of the cable was...

    119,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • From 99,00 PLN in stock

    OHM-10 headset containing a single speaker placed on a wire headband run from the back of the head and elektret microphone mounted on "goose neck" type of boom. The kit comes with a small PTT button which is designed so that it can be placed on the finger or pin at another location. The use of a single speaker in this model lets you keep fully in touch...

    From 99,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 99,00 PLN in stock

    PJS-1 is an adapter that allows to connect aviation headphones equipped with plugs PJ (PJ055 and PJ068) to the portable aviation radios equipped with a small jacks with a diameter of 2.5 and 3.5mm

    99,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 99,00 PLN out of stock

    NC-EBP1 is a empty batteries box for the  NC-55A handheld, aviation radio. It allows to replace a standard lithium-polymer battery (1700mAh or 2400mAh) with a cassette for 6 AAA batteries or recherchable batteries of the same size.

    99,00 PLN
    Shipping: 2 to 8 weeks
    out of stock
  • 99,00 PLN in stock

    TK-BP1 is a maintenance-free battery to power the TK-7xx (TK-750, TK-750mkII, TK-750M, TK-760) radio series. It consists of four flat Li-Ion cells with a total capacity of 1100mAh and the voltage of 7.4V, as well as the control electronics ensures the proper operation of the cell enclosed in a hermetically sealed profile matched to the body of the radio...

    99,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 89,00 PLN in stock
    Sale!

    NC-AN50 is a small and light car antenna optimized for use with handheld and mobil VHF / UHF radios with max. 20W of output power. It has a magnetic base that allows for rapid installation in any part of the car body. The total length of the antenna is 50cm, and the connecting cable 3m. NC-AN50 is terminated connector SMA-F matching among others the radio...

    89,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 89,00 PLN In Stock

    NC-AA3 desktop charger is intended to charge the batteries of the NC-33M marine radio. The charger requires a power supply TK-H, which is available as a separate item or power cable for connection to 12V car installation (TK-C12V). It allows you to recharge the batteries combined with the radio or the battery disconnected from the radio.

    89,00 PLN
    Shipping: 2 to 8 weeks
    In Stock
  • 89,00 PLN in stock
    New

    U-174/U is one of the connector standards used in civil and military aviation. It is used to connect aviation headsets to the on-board installation, most often in helicopters. The offered plug is dismountable and is used for mounting on a multi-core cable.

    89,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 89,00 PLN in stock

    RB-S bag it's a robust transport packaging for portable radio, suitable for most portable NAVCOMM radios (with detachable antenna) as well as other manufacture's models, which dimensions (after detaching the antenna) does not exceed 250x133mm.

    89,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 89,00 PLN in stock

    T-89s is a telescopic antenna with SMA(F) connector. This is the solution for users operating in the 2m or 70cm bands radios equipped with a SMA(M) antenna socket (eg. NC-900), seeking to improve the performance of their handheld transceiver.

    89,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 89,00 PLN in stock

    AA-33 / BNC it's adapter which changing antenna connector NC-33M radio to BNC. It allows to use external antenna systems which significantly affects the range of the radio.

    89,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 79,00 PLN in stock

    NC-Y4Y a waterproof connector adapter containing Y4 plug on the one hand and Y1 socket of the other end. Adaptor is dedicated to marine radio NC-33M, allowing to change the unpopular waterproof standard socket Y4 to widely used type Y1 .

    79,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • From 79,00 PLN In Stock
    1 Review(s)

    NC-PC is a special cable designed for programming  NAVCOMM radios. The cable has a built-in USB controller and plug adapted to the respective model radio . NC-PC also comes with a set of drivers for Windows (XP, Vista, 7, 8, 8.1 and 10)

    From 79,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    In Stock
  • 79,00 PLN in stock
    1 Review(s)

    SPM-10 is an external speaker microphone which has a built-in PTT enables remote broadcasting.

    79,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 79,00 PLN in stock

    PJS-1 is a standard connections used in civil aviation. This kit contains a two slots for mounting on cable. The sockets are fit for classic General Aviation Headsets Jacks (PJ055 and PJ068). Both sockets are demountable and have a hard plastic body.

    79,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 59,00 PLN In Stock
    Sale!
    1 Review(s)

    TK-E12V2 allows you to connect TK-7xx series radios (TK750, TK-750mkII and TK-760) directly into the cigarette lighter socket. It consists of a container-shaped battery (replacing it), the voltage reductor circuit and the cable connector terminated typical automobile 12V plug.

    59,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    In Stock
  • 59,00 PLN in stock
    1 Review(s)

    SPM-5 is a lightweight, external speaker microphone which has a built-in PTT, and additional input for optional headphone ZF-2.

    59,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 59,00 PLN in stock

    AGP300 is an adapter that allows to connect an accessories equipped with a 2-pin connector used by Motorola (eg. In the model GP300) to the following models from this company: HT750, HT1250, HT1250LS, HT1550XLS, MTX850, MTX850LS, MTS8250, MTX8250LS, MTX950, MTX9250, GP140, GP320, GP328, GP338, GP340, GP360, GP380, GP640, GP680, GP1280, PRO5150, PRO7150,...

    59,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 59,00 PLN in stock

    NC-A270is a flexible helical antenna operating in the VHF and UHF band (136-174MHz and 400-470MHz) equipped with SMA-F connector. It is a standard equipment for NC-900 radios.

    59,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 59,00 PLN In Stock

    NC-E12V2 allows you to connect NC-900 directly into the cigarette lighter socket. It consists of a container-shaped battery (replacing it), the voltage reductor circuit and the cable connector terminated typical automobile 12V plug.

    59,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    In Stock
  • 59,00 PLN in stock
    New

    B-46TA is a super flexible ribbon type antenna with an SMA plug (male or female). This solution is dedicated to users of VHF or UHF radios equipped with an SMA-M (eg NC-900) or SMA-F (eg TK750 / TK760) antenna socket who want to improve the transmission and reception parameters of their "towels". B-46TA can work in the 400-480MHz band as a 1/2 antenna,...

    59,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
  • 49,00 PLN in stock

    TK-C / K is a cable that allows the transfer (cloning) set between two transceivers. It is equipped with two "K" (Kenwood) standard plugs. Works with models of TK-750, TK-750MKII, TK-760, TK-890 and NC-900. The cloning operates only between two, the same models. For details on the function itself cloning are the operating instructions for the above models.

    49,00 PLN
    Shipment: finished products 2-3 business days, non-prefabricated products - up to 15 business days.
    in stock
Showing 25 - 48 of 70 items